The Repeaters accept all standard DC or AC signals like Voltage, Current, Resistance, Frequency, Active Power, etc. besides standard temperature sensors like RTD Pt-100, various Thermocouples, etc. Output signals include 4 to 20 mA DC, DC Voltage or Frequency outputs.
The multiple channel Signal Repeaters offer up to four outputs. The instruments provide Optical and Galvanic Isolation and operate on AC or DC Power Supply, as required.
The Repeaters are available in standard DIN-Rail mount execution. Options include Digital Indication, Control Relay outputs, higher load driving capability, weather-proof/ flame-proof/panel mount options, etc.
All ASHE instruments carry a lifetime warranty against defects in components and workmanship. The various models available in this product category are :
The various models available in this product category are :
Model | Type | Input | Outputs | No. Of Outputs | Power Supply | Mounting | Load Ratings | Switching Time | Dimensions | Execution | Relay Outputs | Control Outputs | Analog Outputs | Comm Outputs | No of Fans | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX-212 | RTD Pt-100 to Dual DC Current |
RTD Pt-100 Sensor |
4 to 20 mA DC / 0 to 10 V DC |
2 | 80 to 270 VAC, 50/60 Hz |
DIN Rail | 100x22x110 mm |
|||||||||
TX-232 | DC Current to Dual DC Current |
4 to 20 mA DC | 4 to 20 mA DC / 0 to 10 V DC |
2 | 80 to 270 VAC, 50/60 Hz |
DIN Rail | 100x22x110 mm |
|||||||||
TX-242 | Resistance to Dual DC Current |
Resistance | 4 to 20 mA DC / 0 to 10 V DC |
2 | 80 to 270 VAC, 50/60 Hz |
DIN Rail | 100x22x110 mm |
|||||||||
TX-234 | Single Input to Four Output |
4 to 20 mA DC / 0 to 10 V DC |
4 to 20 mA DC / 0 to 10 V DC |
4 | 80 to 270 VAC, 50/60 Hz |
DIN Rail | 100x45x110 mm |
|||||||||
TX-105 C4 | DC Voltage Isolating Transducer |
mV or Volts DC |
4 to 20 mA DC |
4 | 230 VAC, 50 Hz / 24 V DC |
DIN Rail | 75x55x110 mm |