The instrument uses a Honeywell Gas Sensor and provides the gas percentage on a large 5” display. Besides CO, this advanced microcontroller based system is compatible with all Honeywell Gas Sensors to monitor various gases and can provide audio/visual alarms when the set values are exceeded.

The CO-Safe has a central 4-digit bright red 7-segment display which indicates the CO gas level in PPM units. This Display is also used to configure the instrument, set the measured Ranges of Gas, set the required Alarm Levels, Alarm Types and Alarm Delays, besides additional functions like Calibration, Retransmission, Drift Values, enabling or disabling Relays, etc.

The CO-Safe has a Five-key tactile Keyboard interface on the front panel, which allows the user to set and monitor the various Gas parameters, Acknowledge and Reset Alarms, etc. It has five LEDs for Alarm indications. The configured system menu is stored in a NVRAM which protects the data against power fluctuations and outages. The instrument offers four Relay controls with three Alarm levels and one Fault output to monitor Sensor outputs, besides providing analog retransmission.

The various models available in this product category are :


Model Type Input Outputs No. Of Outputs Power Supply Mounting Load Ratings Switching Time Dimensions Execution Relay Outputs Control Outputs Analog Outputs Comm Outputs No of Fans PDF
SAFE series Single channel 90-270
VAC,
50 Hz
350x250x125
mm
Wall mounting 4 1